Bluelab TRUNV2 Truncheon Nutrient Meter for Plant Germination, White

Product Information

Growers everywhere regard the Bluelab Truncheon CF/EC/PPM as the best nutrient strength meter you can get. The Bluelab V2 Truncheon measures the electrical conductivity of your nutrient solution via electrodes on the bottom end. The Bluelab V2 Truncheon then displays the measurement on a row of LED's calibrated in all the popular scales (CF, EC and PPM). The electrodes are very high quality and will last a long time and are protected by a slotted plastic shroud. Test in 2.77 EC Conductivity Standard Solution to ensure cleaning was adequate. Place the probe in the solution and wait for the reading to stabilise to a consistent value. The display LED's are a bright blue which makes them easy to read, even in daylight. The Bluelab V2 Truncheon automatically switches itself on when dipped into liquid and switches itself off when it is removed from the liquid to save battery-life. The Bluelab V2 Truncheon is pre-calibrated at the factory and has temperature compensation to ensure accuracy. The whole Truncheon is made of a super-tough, waterproof plastic and it's shape means that it can even be used to stir your nutrient solution with. Very highly recommended.

If the Truncheon fails to illuminate any LEDs when immersed in solution, the batteries should be changed. when your ready to harvest and your flushing what should the reading be? and if i take a reading when im growing how will i know om giving it the correct amount of feed is there a chart or something telling you does it give you the reading on the truncheon? Bluelab E.C. Truncheon the go to electrical conductivity meter for the professional hydroponic grower and hobbyist alike. Bluelabs reputation for quality precision measurement instruments for horticulture is well known and respected. Does Leidinn Group Pty Ltd Share the Information It Receives?Information about our customers is an important part of our business, and we are not in the business of selling it to others. We share customer information only with the subsidiaries Leidinn Group Pty Ltd controls and as described below.

The Truncheon will not turn on if the conductivity of the solution is not higher than 0.2EC. Add more nutrients to your solution and re-test. The Truncheon is very robust and can withstand heavy use. It features an unbeatable 5 year warranty and requires no calibration, it will continually provide accurate readings time after time. i was led to believe that the truncheon was an all in one reader but does not mention ph is a ph reader needed as most tap water is neutreul The Bluelab Truncheon has continued to prove itself as the best nutrient meter on the market. This ultra tough device is built to last a lifetime. It can measure your conductivity in a range of easy-to-read formats. It's 'long' design is perfect for stirring nutrient tanks with, plus its fully waterproof incase it ends up in one! Only measure solutions with 200 ppm or higher. Anything less will not return a reading. Read the guide on RO water for more.

Then, leave the Truncheon in a warm, dry place with the cap removed to allow it to dry out. Ensure the O-ring is present and intact. If corrosion is noted, consider replacing the Truncheon. The measurement of your nutrient solution is key if you want to get the best results. When you add nutrients to your water you increase the conductivity; the potential for electricity to move through the solution. By measuring this we can therefore get a clearer picture of concentration of the solution and tailor this to the plants requirements or accurately follow a nutrient schedules recommendations. As a grower, pH (potential Hydrogen) is your fundamental measurement. It dictates nutrient solubility in water, making it accessible to your plants. The Bluelab pH Pen, compact and affordable, is your trusted companion for on-the-go pH and temperature measurement. The Ultimate Toolkit For all Bluelab conductivity probes and the Bluelab Commercial Trun cheon, warm the shroud in your hand for a few seconds to help with removal. Hold the body and gently pull the shroud off. 2: Clean probe faceThe nutrient solution can now adjusted to bring it to the correct strength by adding more nutrient or by diluting with water as necessary. Always rinse the probes with fresh water after every use and clean them once a week with an appropriate cleaner such as the Bluelab Conductivity Probe Cleaning Kit to maintain accuracy, reliability and probe-life. Dirty probe head. The carbons on the probe head are easily contaminated with oils and greases, for example, from fertilisers and organic nutrients, and even your fingers. Try not to touch the probe head for this reason.