Joined in 2023 
82 
63 About this deal
The demand for more energy efficient systems in laboratories within schools, colleges and universities has seen an increase in designers and installers integrating EC polypropylene fans into new and existing fume cupboard systems. Our range of energy efficient corrosion resistant fans with IE5 B34 type EC motors reduce fan energy consumption by up to 20% without affecting the performance of the system and are available in single or three phase versions. A fume extraction fan is most effective when used in conjunction with other types of products and accessories. Whether you require additional components to go with a fan depends on several factors, including your operational tasks, environment size and installation location. We'll do all this to ensure we fully understand your dust and fume extraction requirements and help you to provide a pollution-free workplace! ATEX is an acronym derived from the words “Atmospheres Explosibles” that is soon to be superseded by the term UKCA EX or UKEX in the UK, and forms part of a European equipment directive known as ATEX 2014/34/EU. ATEX 2014/34/EU was adopted within the UK Statutory guidance following Brexit, titled: equipment intended for use in domestic and non-commercial environments where potentially explosive atmospheres may only rarely be created, solely as a result of an accidental leakage of fuel gas.
FUNME 2023 Newly Handheld Fan, Portable Hand Fan Quiet Strong
All the UK bodies that were previously EU Notified Bodies became UK Approved Bodies. UKEX Certification OEMs, Contractors, Mechanical Engineers and Specification consultants entrust Axair Fans with their industrial fan selection for a wide range of applications including air handling units, water treatment, fume extraction, commercial kitchen ventilation, biomass, fan coil units and much more. Our team of in house technical engineers are experts in their niche field, split into the OEM and Industrial division, your enquiry will be directed to the right team to correct select the fan you require. View all industrial fans using the product selection categories below or search by the main navigation menu. Chemical resistant fans are corrosion resistant and can be specified as an ATEX fan, which is ideal for working environments where there are potentially explosive atmospheres. Plastic fans are designed to be run at ambient temperatures and can be situated either indoors or outdoor use. All equipment that is certified for use in a flameproof zone is labelled with a code that defines its limitations to use as a complete UKEX, ATEX or EX rated fan product. The code effectively states the type of environment – above or below ground; the duration of the risk – frequent or accidental; the nature of the explosive atmosphere – gas or dust; the gas group – defined by ignitability; the temperature class – defined by spontaneous ignitability. Air flow controllers can be incorporated to monitor and control air speed and show the correct functioning of the fume cupboard’s air flow. Different versions are available depending on your requirements.This is an amazing service we do for thousands of businesses throughout the UK and Ireland every year. We work with such a wide variety of industries, from manufacturing, industrial, woodworking, pharmaceutical and automotive workshops to schools, colleges and military establishments. Our corrosion resistant fume fans are are designed for applications where potentially corrosive chemicals and hazardous gases are present in the environment or in the air stream. Learn more about polypropylene chemical resistance here. We can also pre-wire to electrical isolators to the motor terminal to ensure first class electrical work in factory conditions and an isolator fan on the pedestal.
Funme Hand held Fan Rechargeable Powerful Fan Strong Wind Funme Hand held Fan Rechargeable Powerful Fan Strong Wind
Model FJC-300 is a belt-driven, arrangement 10 unit available in either coated steel and bolted or welded construction, or a galvanized finish and bolted construction. The unit has a compact footprint with motor and drives located under a common weather hood. A corrosion resistant coating allows for use with corrosive exhausts such as those found in wastewater treatment plants, medical instrument sterilization, or isolation rooms. ATEX rated non-sparking versions of our corrosive extract fans are required where there is the potential for explosion. Some common examples would be: Our plastic extract fans are are designed for applications where potentially corrosive chemicals and hazardous gases are present in the environment or in the air stream. ATEX rated non-sparking versions of our corrosive extract fans are required where there is the potential for explosion. Some common examples would be: The required EU CE Marking is supported by ATEX documentation; UKCA marking is supported by UKEX documentation. The UKEX Certificate number and UKCA marking can be applied either additionally to the ATEX marking, or as an alternative. Most manufacturers seem to have elected to show both sets of marking at the same time. The relevant number of the Notified Body and Approved Body, responsible for supervision of manufacture, must be marked adjacent to the CE and UKCA marking. For components, where the CE and UKCA marking are not applied, both numbers should still be shown, if relevant.Equipment and protective systems intended for us in potentially explosive atmospheres regulation 2016. Auto Extract Systems Ltd is the UK’s leading Local Exhaust Ventilation (LEV) company. Over the last 20 years, we've helped thousands of businesses create dust and fume free workplaces. Another product from Auto Extract that you can use with a fume extraction fan is a cabinet. Fume cabinets are ideal for situations where maximum efficiency is necessary when extracting harmful fumes. The cabinets are designed to allow operators to see through the cabinet while working, yet protecting them at all times by safely controlling exposure. The fume extract fan will collect and dispose of fumes before they become airborne. Certain environments, such as laboratories, may require fans that can withstand corrosive fumes or explosive gasses. The directive covers manufacturing standards and ensures that people are protected against the risk that may be caused by dangerous substances. The directive covers equipment, protective systems, safety devices, controlling devices, regulating devices and components including industrial fans for installation within a system or as a standalone component in a hazardous environment. An air movement or any other application in other markets, will require an explosion proof ATEX fan if there are flammable, combustible gases or dusts present at any time in the air stream. This applies to industrial air movement applications including, but not limited to, machine cooling, process equipment, food processing and manufacturing and electrical cooling. As an example, potentially hazardous particles such as those found in sugar or flour in food processing applications should have an explosion proof fan, also known as a spark proof fan installed within process systems to eradicate the risks as the materials are passed through. Material handling fans can be supplied as explosion proof or standard variants. All polypropylene extraction fans are directly driven by IEC dimensioned electric motors manufactured to BSN4999-EN60034 Standards and are selected on their capacity for:
Related:
Great Deal 
New Comment