Hikvision 4 channel NVR with POE (DS-7604-NI-SE-P)

Product Information

HD CCTV systems are ideal where budget is key, they are low cost, high definition solutions, costing much less than their IP counterparts and offer great value for money. In general, connecting IP cameras to the NVR system is not difficult and they can be easily connected.

Outgoing bandwidth is another thing to think about, as it specifies what the NVR is able to broadcast to other devices - e.

ColorVu cameras will also work on all of these NVRs and the NVR you use will not impact how well the low-light imaging will work. I argued that decoding capability specs limit only Live View, but he was adamant that it affects recording quality as well and that I will run out of Incoming bandwidth.

I purchased this NVR as a replacement for an old unit, to use with 4 existing Hikvision cameras that I have installed at home. We haven’t been hands-on with them yet but they look to be a viable option to add Acusense to cameras that don’t have it while keeping costs down. If you want to get the full quality of an 8MP stream you need to be viewing just one stream at a time on a 4K/8MP monitor.The 96000 series, Hikvision's most advanced model to date, offers all above features with much higher capacities. So, if you are planning to use new cameras in your system, the increased budget of the M-Series models is essentially vital now. The acronym POE stands for Power Over Ethernet, it is a technology that transmits data and supplies power to network devices such as (IP Cameras, VOIP Phones, etc.

There are limitations on adding Acusense from an NVR to a camera that doesn’t already have the technology built-in though, as this guide explains. The majority of Hikvision cameras now have built-in microphones too, which requires even more bandwidth when audio is enabled. Choose the NVR series below that perfectly fits your needs for a seamless and reliable security solution. The POE cameras must be placed in places where we can connect them to the POE Switch so that they receive power and have access to the Router. You can keep your cameras connected to your LAN and add them via their IP addresses to the NVR, so there is no need to rewire anywhere.Once configured in NVR with the data of our network we will be able to see the cameras in high definition from any device with access to the network.