SP2B Flowflex in Line Micro Pump, The Shower Power Booster is an Easy, Efficient & Effective in Line Micro Pump, DIY Solution to Poor Water Pressure, Suitable for All Plumbing Systems.

Product Information

FItting the pump: although it is recommended for the pump to be fitted using 22mm pipe fittings throughout, I used reducers and connected it using 15mm piping. Each shower pump will have its own flow rate, the amount of water it can pump out at the given pressure in each minute. A 1 bar shower pump is perfect for smaller shower heads, while 1.5 or 2 bar shower heads are best for low pressure showers. 3 bar shower pumps are required for power showers and larger shower heads, delivering a high pressure boost. Size If you don't need that much of a boost, you can explore putting just one pump on the hot feed, so a single In Line Micro Pump is the one for you. Ideally, a shower pump will last about eight years before it starts acting up and needs frequent repairs. Without any unusual interruptions and plumbing issues, most shower pumps will perform smoothly for at least six years or so. How far can my shower pump be from the shower tray?

Selecting the right bar pump for you involves considering the size of your shower head and how many outlets you want to pump to. View our shower pump selector guide below for further information. Shower pump selector guide: You’ll also have to choose between single and twin impeller systems. A single impeller pump is used to pump only the hot water supply, while the cold water receives standard pressure from the mains. First up, we have the Shower Power Booster. It’s an automatic, in-line option that can fit right into your existing shower system, without the need to replace it. With a simple installation, requiring just 3 steps, you won’t need to pay a professional to set it up. The mix of brass and plastic is sturdy yet cost-effective, making it a reliable choice for your household, even if you have a fairly conservative budget to work with. The Flowflex In Line Micro Pump is a unique, compact micro-pump, which can deliver up to 1.1 Bar of pressure; all you need for a great shower.Installing a shower pump is relatively simple. It needs to be placed somewhere it can be easily accessed, and not covered by anything. Many people install it inside their airing cupboard, but be careful the motor is not able to overheat. Pressure might be the primary factor to consider as a buyer, but it’s not everything. Another key feature to look for is a twin impeller. Even some 3.0 bar options can miss out on this feature, which is unacceptable for families looking to boost the pressure of both cold and hot water temperatures. You might be able to pass on this feature if you live somewhere with no winters all year round, but for everyone else, a twin impeller is a must-have for a comfortable, balanced shower experience. Positive and Negative Shower Pumps

For those that used to advise me to go on Dragons Den – please read the reality of appearing on the programme.Installing the Flowflex Inline Micro Pump is easy business. Any DIY enthusiast can do it themselves, or call on a professional. All electric showers need an incoming cold water pressure above 0.8 Bar, otherwise the electric shower will switch off heating elements and you will be left with a cold shower or boiling hot water. In automatic mode, the pump will be triggered by water flowing at 1.5 L/min (a very low flow rate). So in all positive head situations, and most negative head situations, the In Line Micro Pump pump will work perfectly.

One of the key advantages of inline shower pumps is their ability to deliver consistent water pressure, regardless of fluctuations in the main water supply. By drawing water from the mains and boosting its pressure, these pumps provide a powerful stream that revitalizes and rejuvenates. Whether you have a high-rise apartment, a low-pressure water system, or simply want to enjoy a more invigorating shower, an inline shower pump can make a noticeable difference. In cases where both hot and cold water are to be boosted a twin pump is needed. Twin pumps have two impellers, one at each end of the pump, one for hot water and the other for cold water. Hot OR cold water In cases where either the hot or cold water is to be boosted a single pump is needed. A single pump only has one impeller which can be connected to either the hot or cold water supply. What bar rating do I need? Some other pumps are only designed for use with 22mm pipes, but the In Line Micro Pump comes with a 22mm x 15mm reducing set in the box, meaning it can be used on both 15mm and 22mm pipework. Single or Double Boost?I went ahead and installed a EHEIM1250 pump underneath my kitchen sink for the hot water tap. This did increase the water pressure, however, it just wasnt strong enough. Below is a guide to determine what pressure/bar pump you’ll need to boost the water in your home. Once confirmed you can then select which pump range you prefer: Shower pumps are designed for use on open vented hot and cold water systems. Low pressure water is taken into a chamber and fed into a spinning impeller. The water is then ejected at high speed. The impellers are powered by a motor, and the higher the power of the motor, the higher the pressure and flow rate. How to install a shower pump? The Flowflex In Line Micro Pump is a universal pump meaning it can be used in positive and negative head situations.

But, negative shower pumps are also compatible with a system that’s gravity-fed (i.e. where the water storage tank’s bottom is at least a meter up from the pump). That’s why it’s called a universal pump, and it’s a safe bet for folks who don’t know what type of system they have in their bathrooms. Positive Shower Pumps Yes. UK Water regulations state that a pump can only be fitted to the mains inlet if it does not exceed 12 L/min. The Flowflex In Line Micro Pump has a maximum flow rate of 9 L/min, making it perfect for use as a whole house solution directly off the mains inlet. Can I use the Flowflex In Line Micro Pump to pump with a Combi Boiler? CT Bathroom pumps have been designed specifically to meet the demand for increased water supply to the bathroom. With positive head and negative (universal) head models available in 1.8 or 2.6 UK Water regulations state that a pump can only be fitted to the mains inlet if it does not exceed 12 L/min. The Flowflex In Line Micro Pump has a maximum flow rate of 9 L/min, making it perfect for as a whole house solution directly off the mains inlet. Compatibility with Electric Showers With a maximum pressure of up to 0.5 bars and able to resist a sustained pressure of 4 bars, it’s a complete whole-house solution, allowing you to say goodbye to low water pressure for good. The Shower Power Booster will deliver around 6-8 litres per minute of flow, all while using just 5% of the amount of energy traditional pumps use. With a feature like that, how could it not be at the top spot?! FeaturesThe SPB is future-proofed and can be replaced and repaired by the customer, or upgraded as new models come along, by simply screwing out the old motor or barrel and screwing in a replacement. From price points to the individual pros and cons of the various types and materials, there’s a lot to learn to make an informed decision! Link multiple vessels together to increase performance. Only one vessel should be a pumped model in this scenario.