Stainless Steel Rod Round Bar Rod 8mm x 600mm

Product Information

For rods that are more than two inches in diameter we offer grade 303. This is the most machinable austenitic grade of stainless steel because it has a slightly higher proportion of sulphur. It is commonly used for aircrafts, nuts, screws and bolts.

The degree of magnetic response in stainless steel is dictated by its microstructure, and certain types of stainless alloys can therefore be manipulated at the processing stage to be more or less magnetic Stainless Steel Round Bars have many great attributes. They are hard, strong, and have excellent anticorrosive properties. Intermediate sized Stainless Steel Round Bars with diameters such as 25mm, 30mm, 35mm, 40mm, 50mm, 2.1/4”, 2.1/2” & 3” will usually be Smooth Turned, although some sizes are Bright Ground. Typically, austenitic steels will be more weldable than most other alloys, but there are exceptions depending on the types of stainless steel finishes and treatments you may requireIn many cases, Grades 303 & 304 are interchangeable, however there are slight differences in each of the grades composition which make either of them the obvious choice for certain applications. Metal bars are lengths of material in a range of forms suitable for use in a wide range of applications. Construction and fabrication industries are some of the most common uses for metal bars and use a wide range of materials and forms in industrial and everyday use products. Nonferrous metal rods- These types are rods that contain no form of iron metal or alloy, these products have a range of benefits depending on the types of metal used in the makeup. All of our stainless steel is sourced from accredited mills and is fully certified. The chemical and mechanical certification is available on request.

Also available in a range of materials, our range of metal bars and rods can accommodate any application. Our bars and rods can be found in: The overall strength of stainless steel products often has an inverse relationship to its corrosion resistance, so getting the balance right is important You may actually be better off with a lower grade of heat resistance in most non-specialised environments or installations

Questions & Answers

Here’s where buying stainless steel rods and bars - or any stainless product, for that matter - can get really confusing. The ‘grade’ of a stainless alloy product denotes precisely what its intended application or environmental resistance will be, and this is dictated by both the specific chemical/elemental makeup of the alloy in question, as well as any finishing or treatment process it has undergone after casting.