Silverline 930166 TCT Circle Tile Cutter 20 - 94 mm

Product Information

Even with this method, try to avoid a tile layout that places the edge of the circular cutout less than 1/2 in. from the edge of a tile. It’s better to shift the entire layout instead. Otherwise, chances are good that you’ll break the tile at the narrow point while cutting. In terms of the ease of use of both of these tools, what is definitely true is that tile cutters are easier to use. Yes, it might take you a couple of tries to get the scoring and the snapping process right, but other than that there is really not much to master. Use a clamp with rubber on its edges versus metal if you’re not using tape.A metal clamp may shatter your tile.

Tile Saw: Although not ideal for cutting straight lines as the blade tends to waver slightly, the tile saw is ideal for cutting shapes and curves, giving you a nice accurate and clean cut A tile cutter is a very inexpensive tool that is, as its name suggests, used to cut tiles. These machines do not require any form of electricity and are completely manual in nature. Tile cutters use a two-step process that involves first scoring the tile and then snapping it by hand. The tile cutter features a base where the tile rests upon, as well as a special scoring knife which is used to create a deep cut in the tile. Once the tile has been scored, it is then snapped by hand. Start grinding. Turn the grinder on and allow it to reach full speed. Insert the shaping tool into the hole you made with the hole saw. Introduce it to the edge of the circle. Move the grinder up and down, exposing the tile to the abrasive material and wearing it away. Continue grinding until you have removed all the excess material, and your hole is the size and shape you desire. There are numerous different tools that can be used to cut ceramic tiles and these include the hand held tile scribe, the manual or contractors tile cutter, the electric tile cutter, tile saw and also hand-held tile nips.Dremels are handheld power tools with fast-rotating motors. Producing precise cuts is easy with a Dremel due to its small size. Preparing for Cutting You may find that with some of the cheaper ones that you need to go over the tile with the cutter 2 – 3 times to make sure that you have completely scored the glaze so the unwanted section will break off easily. Related: Read my comparisons of the Dremel 3000 vs 4000 and the 4300 vs 4000 if you’re looking for the best Dremel tool. Enlarge a Circle in Tile Using a Grinder and Shaping Tool

If you’re a DIY kind of person and you are planning to do your own floors, then one of the things that you’re going to need to decide is what kind of material that you want your floor to be made out of. One of the most popular and most durable materials out there, not to mention one of the best looking, is tile. The first method for cutting straight lines in tiles is the hand cutter or tile scribe. Tipped with a tungsten carbide blade, this tool will score the glaze on any tile and then allow you to simply break it off.

Summary

Whenever you are tiling a wall or floor you will probably need to cut some of the tiles to fit around furniture, or an obstacle such as a toilet or a pipe. Tile saws are very straight forward to use, simply place the tile with the area to be cut overhanging the edge of a works surface, start the cut slowly and then simply take your time to cut around the markings.

Your power tools might create airborne particles, dust, or fumes that may be harmful if you inhale them. Wear a dust mask or respiratorto filter out contaminants and protect your respiratory health long-term. Protect Your Feet and Hands Step 5 – Break Score Line: Place the tile over the edge of a work bench so the scored line is (facing upwards) directly above the edge of the surface or, as we’ve done here, place a pencil directly under the score line. Using the heel of you palm or a piece of wood or similar, gently tap down on the over hang until it breaks off Cut a hole in tile with a Dremel, grinder, or hole saw. Avoid using a tile saw, which isdesigned forcutting a straight line versus a circle.Don’tuse agrinder, Dremel, or hole saw in an explosive environment– a place with flammable liquids, dust, or gases. A power tool may generate sparks, which might ignite fumes or dust. Wear earmuffs or earplugs when cutting a circle in tile.Power tools produce loud sounds that may cause hearing damage or loss, but ear protection reduces this noise. Protect Your Breathing Step 1 – Place Tile on Solid Surface: With the edge that you need to smooth facing upwards or overhanging the edge of a work surface, turn it so the edge is at 90° to your self