Oral-B Pro Battery Toothbrush, 2 Batteries Included (packaging may vary)

Product Information

It removes up to 100% more plaque than a standard manual toothbrush for healthier gums and it starts making your smile whiter as of the first day of brushing by removing surface stains. Not only this, but the toothbrush helps you protect your delicate gums with the 360 ̊gum pressure control technology that reduces brushing speed and alerts you to be gentler if you brush too hard. Product contains batteries and/or recyclable electric waste. For environment protection do not dispose in household waste, but for recycling take to electric waste collection points provided in your country.

The Lithium-Ion battery holds a charge that can last more than two weeks. The charging station is small enough to fit on a bathroom counter or sink. AA BATTERIES MAY HAVE DIFFERENT VOLTAGES. DO NOT USE ANY BATTERY WITH LABELLED VOLTAGE OVER 1.5V OR DAMAGED BATTERY AS THIS MAY CAUSE DEVICE OVERHEATING.

Will you be claiming the VAT back?

Unclip the carrier for the pressure warning light wires and gently remove the carrier from the top shaft (arrowed below) then put it to one side.

An excellent repair guide. I would not, however, recommend this as a first attempt at repairing anything. A very fine point soldering iron and needle nosed pliers are essential and great care must be taken. There are many very small surface mounted components and care must be taken to avoid displacement or damage of these. Similarly, the amount of solder applied should be minimal as components are closely spaced and short circuits must be avoided. Having said all this, if you have a toothbrush that doesn’t work, what have you got to lose? Just take your time and go carefully. This guide is for educational purposes only and is offered without guarantee or liability. For professional use only. Any act carried out by yourself is entirely at your own risk. Any damage to yourself, your toothbrush or anything else is entirely your responsibility. Tools / Parts / Equipment At this point you might realise that you have fallen victim to Braun’s designed-in obsolescence and non-repairability if the plastic tab at the front of the base breaks off. This makes it more difficult for the toothbrush to be repaired (see below.) minute coaching timer. ProCore constant power delivers optimal performance every time. 2 AA batteries included. Compatible with Oral-B brush heads for every oral care need: CrossAction, FlossAction, Precision Clean, 3D White, Sensitive Gum Care, Deep Sweep, Dual Clean. Does not fit iO brush headsTo avoid brush head breakage which may generate a small part choking hazard or damage teeth: Prior to each use, ensure the brush head fits well. Discontinue use of the toothbrush if brush head no longer fits properly. Never use without a brush head. If the product is dropped, the brush head should be replaced before the next use even if no damage is visible.

Be sure you’re charging for the full time noted in the manual. For iO series as of 7 it takes 3 hours. For iO 6, Genius and Smart range and Pro 3 it takes 12 hours. For our Vitality toothbrushes, that’s 16 hours. For the other brushes, they should be charged for up to 24 hours. The first piece to remove from the internal assembly is the power switch plate. This is clipped in on both sides at the top of the brush, see the arrows below. Carefully unclip it from one side, then the other: Oral-B toothbrushes are designed with dentists and are the number one toothbrush brand most used by dentists worldwide. I found the plastic of the battery holder to be harder than I expected and, although I removed most of the webs with a scalpel, I found a Dremel was good at removing the last pieces.Power up to a better clean with the Oral-B Pro-Health Precision Clean battery-powered toothbrush. Your teeth and gums will feel pampered because you're removing more plaque than a regular manual toothbrush each time you brush. The Oral-B Pro 1000 rechargeable toothbrush provides a clinically proven superior clean vs. a regular manual toothbrush. The professionally inspired design of the CrossAction brush head surrounds each tooth with bristles angled at 16 degrees, and 3D cleaning action oscillates, rotates, and pulsates to break up and remove up to 300% more plaque along the gumline than a regular manual toothbrush. The pressure sensor stops pulsations if you brush too hard to prevent harmful over-brushing and there are 3 modes, plus an in-handle timer to help you brush for a dentist-recommended 2 minutes.

Remove the handle from the charger and the base of the handle should come off. The spring might fall out so don’t lose it!At the end of the instructions you could add info on whether it is possible to test the toothbrush without fully assembling it first. That would save a lot of aggravation because the disassembly is so iffy. Make sure you are not charging the toothbrush on a metal surface. The metal can interfere with the charging process. If fitted, locate the solder point for the pressure warning switch (arrowed below) and desolder it. Then unclip the switch and put it to one side. With our Vitality and PRO toothbrushes, it can sometimes be difficult to know when they’re correctly switched off. If they’re on the charger while switched on, they won’t charge correctly. The best thing to do is to put it on the charger for 30 minutes or so, and then try to switch it on. If it switches on, that’s great, and it was correctly switched off while charging. However, if doesn’t switch on, that might mean that it wasn’t switched off during charging. Compatible with a variety of Oral-B refill heads for every dental need. Brush heads should be replaced every 3 months.