HP JL258A ARUBA 2930F 8G POE+ 2SFP+ SWITCH

Product Information

Supports Aruba Airwave Network Management software to provide common platform for Zero Touch Provisioning management, and monitoring for wired and wireless network devices. Aruba 2930F 8-port Power Supply Shelf - Mounts to the rear of the switch and provides a shelf for attaching the external power adapter

J8177C/J8177D are not supported for use in the Dual-Personality ports of the 2930M Series Switches. For use in the JL075A 3810M switch. Also for use in any 3810M switch with a JL083A Aruba 3810M/2930M 4SFP⁠+ MACsec Module installed. Digital optical monitoring of SFP+ and 1000BASE-T transceivers allows detailed monitoring of the transceiver settings and parametersCAT 5e crossover cable RJ45 to RJ45 2.1m (7ft) - Up to 1 Gigabit operation, Ethernet crossover cable with (M) RJ45 connectors on each end Switch auto-configuration automatically configures switch for different settings such as VLAN, CoS, PoE max. power, and PoE priority when an Aruba access point is detected

The 8360 32Y4C model requires configuration of interface groups only for ports 1-4 (as group number 1) to enable the use of 10G transceivers / DACs in the SFP28 ports (Interface Groups default to 25G speed). Ports 1-4 on the 8360 32Y4C model do not support 1G transceivers.

For use in the SFP⁠+ ports of the JL075A 3810M switch. Also used in any 3810M switch with a JL083A Aruba 3810M/2930M 4SFP⁠+ MACsec Module installed. For J8692A, J8693A: K.12.01 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483, and J9054D 1990-4483 and 1990-4360) Optimised for the digital workplace with unified management tools such as Aruba ClearPass Policy Manager, Aruba Airwave and Aruba Central. Provides optimal configuration automatically when connected to Aruba access points for PoE priority, VLAN configuration, and rogue AP containment. X122 1Gb SFP LC BX-D transceiver - Small Form-factor Pluggable (SFP) Gigabit BX (bi-directional) 'downstream' transceiver that provides a full-duplex Gigabit solution up to 10km (6.21 miles) on one single-mode fiber - Has one LC 1000BASE-BX10 port J8177C/D or JL474A will have a delay (~15 secs) before link up or down is properly displayed when a cable is inserted or removed.

Multimode OM3 LC/LC Fiber Optic cable, 15m (49.2ft) long - Duplex zipcord graded index 50/125um multimode fiber optic cable with LC connectors on each end (Aqua Color) - Optical performance: 2000MHz/km Table 57: Compatibility for SFP copper transceiver modules. The specifications for Revision D transceiver products are the same as the specified Revision A, B, and C SKUs. The 25G module (JL687A) requires configuration of interface groups (groups of four ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (Interface Groups default to 25G speed).Multimode OM3 LC/LC Fiber Optic cable, 0.5m (1.64ft) long - Duplex zipcord graded index 50/125um multimode fiber optic cable with LC connectors on each end (Aqua Color) - Optical performance: 2000MHz/km R0X44A/R0X44C auto-detects the inserted type of transceiver; it does NOT require any interface groups like the 8325. Aruba ClearPass Policy Manager support Unified wired and wireless policies using Aruba ClearPass Policy Manager

For use in the SFP ports on the models listed. Also for use in the dual-speed SFP⁠+ ports of the J9731A 2-Port 10GbE SFP⁠+ Module.X121 1Gb SFP SX Transceiver - Small Form-factor Pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550m (1804ft) on multimode fiber - Has one LC 1000BASE-SX port