LOUQE Raw S1 Mk I (Rhodium Grey) Mini-ITX Computer Case

Product Information

And when all said and done, the Louqe Raw S1 is hands-down the nicest ITX chassis I’ve ever had the honor of working with. From its stunning, elegant single-piece external shell to the simplicity with which a system inside it pieces together, the Raw S1 is a chassis that I’m going to remember.

Considering the total size of this offering and its support for some of the largest graphics cards on the market, thermal performance holds up extremely well. There are not many fan formations – only two fans can fit in the case – but it is clear that airflow was a major consideration during design. Their previous cases are some of the most popular choices for Mini-ITX builds around thanks to their premium materials and minimalist aesthetics. From early images and specs, the new LOUQE Raw S1 offers an increase in size without compromising on much of anything.The PSU will be mounted with the input AC connector pointing up, as close to the front side of the shell as possible. This serves two purposes: it moves the cable routing out of the airflow path, and it points the PSU exhaust up instead of forward, which should help a tiny bit. It goes without saying that this is a unique and visually striking case, whether you're a fan of the particular aesthetic or not. I'm going to skip commenting on the looks and artistic merit to focus on the practical aspects instead. Despite its unique design, the case’s thermals do not suffer. LOUQE has tested temperatures in the chassis with two different GPUs. Using the 3D-mark Firestrike extreme benchmark, the Nvidia RTX 3080 FE (2-slot) reached 70 °C with the case closed. In the same test, an EVGA RTX 2070 FTW3 Ultra (3-slot) reached just under 60 °C. The Raw S1’s ability to fit 3-slot graphics cards is a nice step-up from some competitors. It supports triple-slot GPUs up to 145 x 65 x 320 mm in size. For comparison, the Ghost S1 fits dual-slot GPUs up to 143a x 45 x 305 mm. As for looks, the Ghost S1 is most similar. In fact, it looks quite a bit like the same case stood vertically if a few inches were added all around. This is not an issue; the design of the Ghost S1 is a major selling point for many buyers. However, people who were not fans of LOUQE’s last offering are unlikely to change their minds here. Louqe's CPU Cooler Test and their support recommend adding an A12x15 fan on top of the NH-L12 GE cooler to achieve silent performance. You can get extra 120mm fan clips from Noctua for free to mount it, and you should get "silent" full performance!

The new RAW S1 promises full gaming PC power in one of the smallest chassis currently available. Its thin, minimum aesthetic is also unique; the popular Corsair One and Ghost S1 are two of the only other thin cases of this size. Outside of these options, it is rare to find other models that can also support powerful components. In an already limited category, LOUQE aims to situate itself as the best option.

The Louqe Raw S1 is more than just a case – it’s arguably a functional work of art.

GIGABYTE B550I AORUS PRO AX gave me a bit of headache. CPU cooler clearance is perfect, plenty of room at all sides, however I struggled with CPU-less bios flash. I had to flash the bios to get support for Ryzen 5000 and I couldn't make the flash work. Eventually I googled out that it only works with USB 2.0 thumb drives. Granted I was using USB 3 thumb drive. So I replaced it with older USB 2.0 thumb drive and then the flash went through properly. Another problem with the board is that PWM fan speed regulation sometimes does not work. I have created separate post about it here: https://www.reddit.com/r/gigabyte/comments/r79tra/pwm_sometimes_failing_on_b550i_aorus_pro_ax/ . Not sure if it's issue with my concrete piece or if it's general problem with all these boards. This was resolved by removing Gigabyte software (SIV and EasyTune Engine).

This case needs custom length power/fan cables (without sleeves, since you can't really see them anyways) because space is so limited. I recommend using PET hookup wire, since it's easy to work with and very thin. As I'll get into later, maximum airflow is very important. An anemometer is a device that measures air speed. I measured air speed at 9 points around the exhaust vent and multiplied the average by the approximate area of the vent openings to get an airflow number in CFM. It's not perfect, but it will get us some ballpark numbers. Because of this, I would actually say the Raw S1 is perfect – because it does a 100% job at achieving what the designers set out to achieve: a simple, easy-to-work-on minimalist system that looks the part and cools well.What sets the Louqe Raw S1 apart from the crowded world of PC cases is that it isn’t afraid to go in a totally different direction and limit your options. There is no tempered glass, no watercooling support, no RGB, nothing that falls into the typical trends of today’s day PC case design. And that, I applaud. It takes courage as designers to swim against the current and try something like this. With a small footprint and beautiful finish in both the tempered-glass and mesh variants, the Evolv Shift 2 is perfect as an SFF PC for use in the living room, or moving around the house wherever you need it. The easily accessible top IO makes plugging devices in a breeze too. Building in it was tight, and came with the typical frustrations associated with Mini-ITX systems, but I still managed a build within about 3 hours, and the end result was well worth the effort. The overall size is a bit bigger than most Mini-ITX cases would be, but the tempered glass side panels do wonders for creating systems to show off, though keep in mind that its single-fan radiator support may be too thermally limiting for some systems. An important note: the Corsair One case is only available in prebuilt configurations, severely limiting GPU and CPU options. Meanwhile, the Raw S1 will support most graphics cards and CPUs on the market thanks to its construction. The Raw S1 is a more subtle design than the Corsair One, opting for simple sides and vents instead of the Corsair One’s LEDs and large vents. Instead, the Raw S1 looks much closer to its smaller brother, the Ghost S1. There are almost no markings or features on the outside of the case. In fact, the front only features one small button for power, and I/O options are limited to a single Type-C placed on an angled panel. Is it perfect? From one point of view, no. It doesn’t have air filtration. There’s no real front IO, and no room for expansion. But none of that is what the Louqe Raw S1 is about. Extra fans, filtration, and expansion space would make the chassis bigger and more complex, entirely defeating the point.