Dimplex Gosford Optimyst Electric Stove, Black Cast Iron Effect Free Standing Stove with Ultra Realistic 3D Flame Effect, 2kW Adjustable Fan Heater, Thermostat, Artificial Logs and Remote Control

Product Information

To prevent the cable becoming pinched between the nozzle and the sump, and to prevent water traveling down the wire and causing water to escape from the sump tank, place the cable in the provided slot in the right hand side wall of the sump. The thermostatic controls mean you can set your fire to produce heat when the room drops to a certain temperature, helping to maintain comfort in your home. The cast iron style is a traditional classic, fitting in with any interior. Then, between 5 and 15 minutes later, I hear a beep, the lights go out and the mist production ceases. If I leave the fire in this conditon it will somehow re-set itself after between 10 and 15 minutes, turning-on lights and mist to resume its normal, and very satisfactory, operation. This "start, stop, re-start" cycle continues for as long as the fire is left turned-on In the first instance we will endeavour to repair the item if received damaged. Only when the manufacturer advises its unrepairable will we then issue a replacement.

I am posting this because I am having problems which seem slightly different from all other Optimyst problems I've read about here To clean the transducer, remove it from the fire and dry carefully. Once dry, clean with the brush provided with your fire.This electric fire features Optimyst 3D flame effect which can be used with or without heat, which instantly adds an inviting, warming glow to the room. This fire can be operated by the manual controls located on the unit or the easy to use remote control. Optimyst uses ultrasonic technology to create the world’s most realistic flame effect, with an ultra-fine water mist that mimics flame and smoke. As the mist rises through the logs, warm light is emitted which reflects against the water, creating an incredibly realistic 3D illusion of flames and smoke which is commonly mistaken for the real thing. Dimplex - Heating for Generations. Proud to be the trusted name for energy efficient electrical heating, ventilation and cooling for over 70 years. Comes with a 1 year guarantee included Water should not be allowed to stand in the tank or sump for more than two weeks. If you will not be using the fire for an extended period, it is recommended to remove the water and dry the sump and water tank. Where can I get a replacement if needed? STYLISH FREE STANDING ELECTRIC STOVE –Brayford combines a classic feeling of a wood burning stove and modern functionality, with realistic log effect fuel bed, built in thermostat and remote control The glass disk transducer is the visual heart of our Optimyst range, sitting inside our products and creating the ultra-fine mist that forms a key part of the world’s most realistic flame effect. How does it work?

OPTIFLAME FLAME EFFECT - Our popular realistic flame effect with cost effective LED lighting. The flame effect works independently of the heater, so you can enjoy a cosy, warm ambiance all year roundThis fire can operate via a remote control and can even be used independently of the fully concealed 2kW heater, meaning you can enjoy the classic feel of the fire all year round. As advised in the instructions for your Optimyst product, the transducer should be cleaned every two weeks and only filtered water should be used to fill the water tank/sump. If tap water is used, a build-up of limescale can impact the operation of the transducer and seriously hinder the smoke and flame effect. Ionised and distilled water should also not be used. We deliver within the UK only. To calculate delivery costs, please add the item to your basket and enter your post code. The Dimplex Optimyst range is state-of-the-art, using established ultrasonic technology to create an ultra-fine water mist that rises up and works with the under fuel bed lighting to give a fully three dimensional fire effect. The result is so authentic that it is regularly mistaken for true flames and smoke. Additionally: I have cleaned the transducer disc, although it didin't appear to need this . . . and it made no difference; I replaced the disc with same number (RM 0202) discs but these did not produce any mist at all (tried all three supplied with the same non-result). Replacing the original disc resulted in the return of sporadic mist, as stated earlier