Grandstream HandyTone HT801 ATA

Product Information

Note: Please use the 1.0.9.x firmwares below for GWN7600/7600LR/7610with GWN7000 1.0.9.4deployment. Advanced telephony features are too a possibility, including call transfer, forwarding, waiting, do-not-disturb, ‘message waiting’ indication, multi-language prompts. The UC provider, furthermore, has a flexible dial plan. The primary differentiator between HT801 and HT802 is the number of phone lines you get.

Although the Grandstream HT801 adaptor can be connected to any VoIP phone service, we supply it pre-configured for connection to the Premitel VoIP Phone Service. The HT801 is designed to connect to a VoIP phone service where a traditional landline is not required or is not available (eg fibre-to-the-premises broadband connections). Updated Time Zone option “GMT+01:00 (Paris, Vienna, Warsaw)” to “GMT+01:00 (Paris, Vienna, Warsaw, Brussels). If the GXP21xx phone is on firmware 1.0.7.x, please upgrade to 1.0.8.x first, and then upgrade to 1.0.9.x. When placing the analog phone that is connected to the FXS port off hook, the dial tone will be played even if the sip account is not registered. If users prefer the busy tone to be played instead, the following configuration should be made:

That’s a wrap

Grandstream’s HT818 gives users access to the above features and has a total of eight FXS ports. Advantages of Grandstream’s ATA HandyTone Series In situations where only one analogue phone (or a multi-handset cordless phone base) is to be connected to the VoIP phone service then the lower cost Yeastar TA100 may be a better option. Alternatively, the HT801 can easily be reset to its default settings and configured for connection to another VoIP internet phone service. Busy Call Forward: Dial “*90” and then the forwarding number followed by “#”. Wait for dial tone then hang up. The users can now use the IVR system to obtain specific details about the device’s certificate type.

Insert the Ethernet cable into the internet or LAN port of the HT801/ht802 and connect the other end of the Ethernet cable to an uplink port (a router or a modem, etc.) SIP User ID: User account information, provided by VoIP service provider (ITSP). Usually in the form of digit like phone number or a phone number. If the option “Flash Digit Control” is enabled on web UI, call operation will require different steps as follows: The HT801 and HT802 are designed for easy configuration and easy installation, to connect your HT801 or HT802, please follow the steps above:The Ethernet LED lights up when the HT801/HT802 is connected to your network through the Ethernet port and it flashes when there is data being sent or received. The HT801 is designed for easy configuration and easy installation, to connect your HT801, please follow the steps below: The HT801/HT802 supports Bellcore style 3-way Conference. To perform the 3-way conference, we assume that the call is established between phone A and B are in conversation. Phone A(HT801/HT802) wants to bring third phone C into conference:

During an active call, press “Flash” button on the analog phone (if the phone has that button) to place the call on hold. Grandstream recommends using HTTP protocol for firmware upgrades. Please note our public firmware upgrade server is using HTTP. It is therefore ready to use immediately and is supplied with a call bundle of 20 minutes of UK landline and mobile calls during a 14 day trial period.

BYO modem/router

This section documents significant changes from previous versions of the user guide for HT801/HT802. Only major new features or major document updates are listed here. Minor updates for corrections or editing are not documented here.