Innokin Endura T20-S Coils 0.8ohm ( 5 pack)

Product Information

The T20S can be paired with either the 0.8 Ohm or 1.5 Ohm coil from the Prism S coil range and both will give a full flavour. 0.8 Ohms will produce a moderate amount of vapour, whereas the 1.5 Ohm version is more discreet and produces less vapour. With the 0.8 Ohm coil we'd recommend an e-liquid with a mix of around 50% - 70% VG and for the 1.5 Ohm coil we'd suggest an e-liquid that's 50% PG or higher. Capable of holding up to 2ml of e-liquid, refilling is made simple thanks to the top filling mechanism that features on this tank. The Jem pen is another starter kit from Innokin. This 1000mAh battery device requires you to use the specific Jem coils and high PG vape juice. I haven’t got this battery to run out yet – at 7.5 hours the light is still showing green (above half charge) so I hope that gives you an idea of the battery life. What I Like

There is no airflow adjustment on this, it would help as it’s a pretty airy MTL vape. Some smokers might prefer to have a slightly tighter draw to mimic a cigarette. Basic operation This is a definite MTL coil, quite restricted airflow – but it could do with a slightly tighter draw to satisfy a smoker.The Innokin Endura T18-E and the T18ii are devices aimed at new vapers. They are traditional pen-style devices with simple features. They are best used with high PG vape liquids and offer a mouth to lung vape. The coils you need for the T18-E and the T18ii are the Endura T18E Replacement Coils. The lower capacity battery is a bit shorter in length. Both batteries have the same diameter and functions. How Does the Innokin Endura T20-S Starter Kit Perform? With high VG liquid you should get more vapour production. This is an ok vapour – not massive clouds which I have got from the same liquid in lower resistance coils – but still good enough. We urge customers to use our DPD Next Day delivery services 2 days prior to any Bank Holiday to ensure that your delivery arrives before the bank holiday

Leave the tank for 5-10 minutes for the liquid to soak into the coil. Also before using take a couple of inhales on the mouthpiece without activating the fire button. Do not store your batteries in extreme temperature conditions. Excessive heat or cold are bad for batteries/cells.This is a top fill tank which I prefer. I did find there is little to grip to unscrew the top cap – you often end up removing the mouthpiece instead. Simple battery charging- connect the small end of the supplied USB cable to the side of the battery and the larger end to a USB outlet port. The light on the button goes out when it is fully charged. In The Hand I’ll ask Michelle, who used the device and carried out the review, to share her thoughts as she used a 12mg nicotine for the review. Unscrew the top cap (not the mouthpiece which I did accidentally a few times!) Grip the top cap part of the tank to unscrew.

The top cap and mouthpiece unscrew easily and the tank is extremely easy to dismantle if you want to wash it out or change the glass.

What do I do if the battery has been damaged or is leaking?

The T20s kit is another starter device, with a 1500mAh battery. It is ideal for new vapers as it has a mouth to lung draw and works best with high PG vape juice. Hope that helps in the meantime, anything else that comes to mind you want to clarify please ask away. The Coolfire Mini uses Innokin Slipstream coils . These are a stainless steel coil and 0.8ohm with a Kanthal wire. This will provide a cooler vaper, large cloud and will be best used with high VG eliquids. iSub and iSub G tanks Another tip is to remove the drip tip when installing a coil – this makes sure that the coil is fully inserted into the tank when you secure it. Flavour & Cloud Production

Never use a battery that has been clearly damaged or is leaking. It should be discarded immediately in an appropriate way. The Innokin Prism S 1.5 Ohm coil produces the least amount of vapour, capable of being used between 15 - 18W. For increased flavour and a slightly larger amount of vapour, we recommend the 0.8 Ohm or 0.9 Ohm coil. However, the 0.9 Ohm version also has a mesh build, meaning that you'll experience a more intense flavour from your e-liquid thanks to being heated up faster. Whichever version of the coil you choose, we suggest either a 50/50 e-liquid or high PG eliquid. The Endura T20-S comprises of a 1500mah battery unit with a Prism T20-S tank. The tank is a top fill. Please refer to the data protection section of our terms and conditions for information on how we handle data. A tip I found with my friends T18 tank, is to always make sure the drip tip is fully pushed into the top cap. The bottom of the drip tip makes a seal with the centre of the coil. If the tip isn’t fully pushed in this can cause liquid to enter the centre of the coil which can result in spitting and leaks from the bottom pin of the tank.

Estimated delivery time is between 3 and 5 days. This is not guaranteed. Please allow up to 10 days To change the coil you will need to empty the tank – so either decant the liquid into a suitable container or pour onto a tissue and discard. My friend owns just the T18 tank on its own and uses it on a mod. So for those who want to just buy the tank on its own – I put this tank on my Eleaf Pico to test its performance. Innokin have brought us some of the best vape pen devices in the past including those with the ‘Endura’ name. There is the Endura T18 and the Endura T20. Do not get confused as the T20-S is very different from the T20 and does not use the same coils.