Joined in 2023 
82 
63 About this deal
RT84 is our new arrival. We know RT84 is a dual band DMR radio, so many more functions we need to program by RT84 software. If you find your RT84 can’t program, please don’t worry, today we will give you a method to solve the problem when you program your radio. If you update drive successful, It will have a hint to show you have update the driver successful as the picture as below. Because of the Full function, low price, RT84 is very popular around the hams. Do you have problem when your RT84 programming? Secondly:Choose the VFO A or VFO B in the mode you want to programme,Normally we set VFO A to digital mode and VFO B to analog mode.
Downloads
VFO mode: RT84 has the VFO mode, you can Establish temporary channel in keyboard, no need the PC and programming cable. If you can see the “TM Device in DFU Mode”like the picture above, it means driver installed successfully,and it is connected properly. Buttons Definitions: RT84 has 3 side button, and the P1 P2 on keyboard you can setting as you need. Ailunce HD1 amateur radio analog radio analog repeater Bluetooth Radio business radio DMR Radio GMRS GMRS radio Ham radio HD1 High power radio IP67 IP67 Waterproof kids walkie talkie license free radio Marine Radio Marine VHF radio NEW ARRIVAL New arrivals PoC radio Repeater RT97 retevis Retevis RA89 retevis RB21 Retevis RT3S retevis rt5 RETEVIS RT22 Retevis RT29 Retevis RT36 Retevis RT47 Retevis RT49P Retevis RT81 Retevis RT97 Retevis RT649P RT3S RT29 RT82 RT97 RT97 repeater Two way radio Walkie Talkie waterproof waterproof radio Waterproof Walkie Talkie Recent SearchesPlease connect your radio and computer, Turn on your radio, choose the correct communication port(the communication port need to maintain consistency with your computer) ; Scan list: You can add 250 scan lists, and each scan list can add the channel member shall not be greater than 31! If you see there is a Yellow exclamation point, it means the driver was not installed successfully. Press the top sidekey and PTT together, turn on the radio at the same time. we will see that the led is flashing red and green. It means the RT84 is in DFU mode. Read from radio, you can see the factory settings of RT84 software. Then we will have a detailed Software Introduction of RT84. RT84 software:
RedThunder K84 Wireless Keyboard and Mouse Combo, RGB Backlit RedThunder K84 Wireless Keyboard and Mouse Combo, RGB Backlit
Channel information: You can add at most 3000 channels here, and change the channel mode(digital/analog), Also you can set the TX frequency and RX frequency, Emergency and others. You can import & export the channels information here! Zone information: You can add 250 zones, then put the channels into the zones, you can find your need channel more convenient; hi, the VFo mode can help you set your Vfo MODEL with the PMR446 frequency, but you can not save it as a channel! Note: If the RT84 is not in the DFU mode before upgrading, you will can't upgrade successfully. Or will result white screen.The first one worked for a while, I was able to update the firmware, program the radio etc, now it keeps saying “Device Descriptor Request Failed” when I plug in the usb cable It is a entry-level amateur hams radio.It have more than 16 soft keyboards, support not only on pc programming, but also by manually.
RT84? How to solve the problem when programming RT84?
RT84 is a Dual Band DMR Radio, frequency is UHF400-480 Mhz and VHF 136-174 Mhz, and it has Direct Mode/Dual Capacity Direct Mode (DCDM).
Recently Posts
Great Deal 
New Comment