Napier Airgun Pull Through Kit

Product Information

Right: Take hold of the pull-through and pull the patches through the bore, taking care to keep everything central and away from the crown

Power Pull Through Kit | Napier UK – Napier-usa Power Pull Through Kit | Napier UK – Napier-usa

A: How often you should clean your air rifle will depend on how often you use it. If you never use it, you won’t have any real need to clean it (provided that it’s stored correctly). A well-made air rifle won’t need to be cleaned each time it’s used, and if anything, cleaning too often can actually risk damaging the barrel. All of that is to say that you only need to clean your air rifle if you notice a decline in accuracy, or if you want to experiment with a new kind of pellet. Even then, many people recommend never cleaning an air rifle at all. Q: What kind of cleaning kit do I need for my air rifle? When you notice your rifle isn’t shooting quite as well as expected, cleaning the bore and re-leading the barrel is all that’s usually needed to restore the gun’s inherent accuracy. This is a fairly gentle, non-invasive process, but what happens if it fails to work? Drinking straw: A straw gives the pull-though a head start any time you’re trying to clean a barrel that doesn’t offer direct access to the muzzle, such as a shrouded barrel with a non-removable end cap. The Napier Airgun Pull Through Kit comes complete with 100 Power pull through patches, ensuring you'll have plenty on hand for multiple cleanings. Our kit also includes 1 x 120ml Power Airgun oil Pump Spray, which contains exactly the same amount of active ingredient as the 200ml Aerosol version. Convenient and Portable The easiest way to insert a pull-through is directly into the barrel – this BSA Ultra XL makes the job easy

Ammo

I decided to put my money where my mouth is and try it in a number of my own air rifles, but using a pull-through rather than a rod. When using any type of liquid near the breech of an airgun, less is definitely more, and I was careful to use a minimal amount with each pass of the patch. A secondary benefit of bore paste is its deep cleaning ability, and some shooters like to use it as an occasional cleaning product in addition to its intended use of prepping a new bore. Bore paste is meant to be applied to either a patch or brush, and rodded down a barrel. As mentioned above, I’m not a fan of using cleaning rods with airguns, but bore paste can be applied using a pull-through. It won’t be as thorough, but you can repeat the process as many times as you like until you’re happy with the result. x 120ml Power Airgun oil Pump Spray (This contains exactly the same amount of active ingredient as the 200ml Aerosol version)

What are the best air rifle cleaning kits? | The Wolfman

As an air rifle owner, you know that accuracy and consistency are key to a great shooting experience. But did you know that every time you fire your air rifle, lead deposits on the rifling lands? Over time, this can cause your accuracy to suffer - not to mention the risk of corrosion. Of course, using the right materials is crucial. That's why Air Arms trusts only Napier gun care products for their air rifles. With a focus on quality and performance, Napier products are designed to keep your air rifle in perfect shape, so you can focus on nailing your shot. Patches: These pre-cut patches are also from Napier – just layer different numbers of patches according to the calibre of the gun you’re cleaning, and don’t forget some pistol barrels can be cleaned this way as well. Bore pastes are grey to begin with, so that will account for some of the discolouration on the used patches, but the results were nevertheless incredible.Scroll down to watch the video below for detailed instruction on how to use the Power pull through kit. Complete Air Gun Cleaning Kit Want to achieve the ultimate in accuracy? The secret is simple: regular cleaning and relubrication of your barrel. But how often is "regular"? While it may vary depending on your specific circumstances, we recommend giving your barrel a clean and re-lube every 150 shots for best results. This will help keep your barrel in tip-top condition, ensuring top-notch accuracy every time you shoot. Once the pull-through loop is in place, consult your instruction manual to determine how many patches you'll need for your calibre. Attach the patches to the loop and pull through the air rifle, examining the patches for fouling. Repeat until they come out clean.

Napier Pull-Thru Cleaning Kit - Airguns of Arizona Napier Pull-Thru Cleaning Kit - Airguns of Arizona

A: The kind of cleaning kit you’ll need for your air rifle will depend on the calibre of your airgun. Most air rifles are .177 or .22 calibre, so you’ll need a kit that includes a bore brush for those sizes, as well as suitable oil and cleaning pellets. You may also want to get a pull-through cleaner, which can be helpful in getting all the dirt and grime out of your barrel. Q: How do I clean my air rifle barrel?A: The best way to clean your air rifle pellets is with warm, soapy water. This will get rid of any dust and debris. When dried, they should be lubricated with oil to prevent oxidation. Cleaning air rifle pellets may improve accuracy and prevent fouling. Q: Can I use WD-40 to clean my air rifle? So why wait? Keep your air rifle in top shape with Napier's pull-through kit and enjoy a smooth, accurate shot every time. Your air rifle (and your aim) will thank you! Looking for the perfect cleaning kit for your air rifle? Look no further than Napier's Airgun Pull Through Kit! Our kit contains everything you need to effectively clean any type of air rifle, making it suitable for both .22 and .177 calibres. Easy-to-Use Design

Airgun Cleaning Kit Napier Pull Through - A. Branthwaite Airgun Cleaning Kit Napier Pull Through - A. Branthwaite

So what are you waiting for? Make sure you're using the best products to achieve the ultimate accuracy with your air rifle. Choose Napier gun care products and experience the difference for yourself! It’s best to carry out the barrel-cleaning process in a clean area. Some of the products being used can irritate skin and eyes, and we are also dealing with the removal of lead, a poisonous metal. Latex gloves will offer the best protection, although I just prefer to wash my hands thoroughly once I’ve finished.

Accessories

Next, grab your pull-through tool and carefully pass it through the barrel from the muzzle end. If your air rifle has a moderator, be sure to align the cable correctly. Pro tip: using a drink straw can make this step even easier! Or simply remove the moderator. A: No, you should not use WD-40 to clean your air rifle. While WD-40 is great for cleaning other things, it’s not designed for cleaning firearms and can actually damage the seals on your air rifle. Q: How do I clean my air rifle scope?