Alto Professional TX308 – 350W Active PA Speaker with 8 Inch Woofer for Mobile DJ and Musicians, Small Venues, Ceremonies and Sports Events

Product Information

BUT: I got this to serve as the monitor for my solo git'r/singing setup (main PA is a Bose L1 Compact). So it didn't need to have the multi-input/mixer section. As it is, it simply has a single input and level control. I participate in a weekly worship service at a local nursing home. Our old Peavy amp quit working and I didn't think it would be worth looking into getting fixed. I asked Jonathan Appleton for his advice about using a powered mixer with our existing speakers. He understood that we couldn't spend any more of the church's money than we absolutely had to, and he recommended using a powered speaker with a good inexpensive mixer. He recommended this speaker and an appropriate mixer and we couldn't be more pleased with both the price and the performance of the speaker. We haven't been using it long, but we can definitely reach all the way throughout a medium sized dining room and probably a lot further. I can't imagine a better solution at any cost. Add to that their full complement of inputs/outputs and mounting options and it’s easy to see that the TX3 Series plays an indispensable The more premium level would be units like the QSC K series or Yamaha DXR series which again have ample volume for most applications, very good DSP contouring options, premium speakers and components, and great care and quality in the cabinet design and materials for both sound and durability. El TX308 presenta un diseño de 2 vías biamplificado, incorporando un woofer de gran excursión y un transductor de compresión de 1 pulgada con diafragma de titanio, montado en una bocina de precisión. El diseño de esta bocina mejora el rendimiento de las frecuencias elevadas y genera un preciso patrón de radiación de 90˚H X 60˚V, ideal para conseguir una óptima cobertura de la audiencia.

Alto TX 308 – Thomann UK

Power comes from Class‑D amplifiers rated at 350 Watts peak or 175 Watts continuous, and the overall system has a specified frequency response of 75Hz to 20kHz at the ‑3dB points. Protection is provided by a built‑in analogue limiter and additional thermal overload protection circuitry. Two LEDs indicate power and the presence of signal/clipping, while a rotary control adjusts the input gain, which offers enough range to cater to both line‑level and mic‑level sources. There’s also a power LED on the front panel. The maximum SPL for a single speaker is specified as 117dB at a distance of one metre, which although not massive, should be adequate for many types of small venue applications including solo artists, duos and bands without loud drum kits. The speakers are suitable for both vocals and instruments such as guitar, though you’d need the larger models and/or an additional subwoofer if planning to put bass or drums through the PA. With a little mixer EQ you can get a very workable vocal sound out of these speakers, and a pair will provide adequate volume for smaller venues... Deliveries will be made subject to the terms and conditions of the courier company. djkit.com will not be held responsible for late deliveries. Please note that this extended warranty is currently only available on products sold within the UK, EU or EEA, and is subject to the terms and conditions as detailed on the extended warranty certificate provided. Enclosure: Injection-moulded polypropylene, multi-angle for main or monitor applications, metal grille, rubber feet, 1 handle on top Powered, portable PA loudspeakers are a workhorse product that we’ve all relied on at some point. If you need a portable PA system for DJ’ing or general sound reinforcement, you can’t argue with the convenience of powered PA speakers. Furthermore, they’re extremely convenient for use as on-stage monitors to supplement a larger, install PA rig.monitor positioning and the full-sized steel grille gives complete driver protection. These speakers are built for continuous heavy-duty use. Side note: If I go with PA type speakers, I would keep them on the floor as wedges. If studio monitors, I would buy stands. high-frequency performance and produces a very precise 90?H X 60?V radiation pattern—ideal for optimal audience coverage.

Alto Professional TX308 350W 8-inch Powered Speaker Reviews Alto Professional TX308 350W 8-inch Powered Speaker Reviews

Alto was founded in 2000 by a team of engineers looking to find a way of creating great sounding PAspeakers at a more affordable price than was currently on the market. By pushing the boundaries of modern manufacturing techniques and built in DSP technology, they have created a range of products that offer amazing value to the gigging musician and live sound venue.Enclosure: Injection-molded polypropylene, multi-angle for operation as main speaker or monitor, metal grille, rubber feet, 1 top handle However, the Gear4music extended warranty scheme provides an enhanced service, and is designed to offer a higher level of protection than many 'free' warranties offered by some retailers and manufacturers.