Rubik's 360 Puzzle Ball

Product Information

Solutions to this cube is similar to a regular 3x3x3 except that odd-parity combinations are possible with this puzzle. This cube uses a special mechanism due to absence of a central core. Very possibly the simplest regular cuboid puzzle to solve. Completely trivial solution as the puzzle consists of only two cubies.

Simple Ways to Solve a Gear Ball (with Pictures) - wikiHow

There are many puzzles which are mechanically identical to the regular cuboids listed above but have variations in the pattern and colour of design. Some of these are custom made in very small numbers, sometimes for promotional events. The ones listed in the table below are included because the pattern in some way affects the difficulty of the solution or is notable in some other way.Experimental cube made by 3-D printing of plastic invented by Oskar van Deventer. Corners are much larger in proportion, and edge pieces match that larger dimension; they are narrow, and do not resemble cubes. The rest of the cubelets are 15x15 arrays on each side of the whole cube; as planned, they would be only 4mm on a side. The original mechanism is a 3x3x3 core, with thin "vanes" for the center edges; the rest of the cubelets fill in the gaps. The core has a sphere at its center. As of 2023 it is being mass produced by the Chinese companies YuXin and Shengshou. [10] Mechanically identical to the standard 3×3×3 cube. However, the numbers on the centre pieces force the solver to become aware that each one can be in one of four orientations, thus hugely increasing the total number of combinations. The number of combinations of centre face orientations is 4 6. However, odd combinations (overall odd number of rotations) of the centre faces cannot be achieved with legal operations. The increase is therefore x2 11 over the original making the total approximately 10 24 combinations. This adds to the difficulty of the puzzle but not astronomically; only one or two additional algorithms are required to affect a solution. Note that the puzzle can be treated as a number magic square puzzle on each of the six faces with the magic constant being 15 in this case. Mechanically identical to the 3×3×3 cube although the example pictured is easier to solve due to the restricted colour scheme. This puzzle is a rhombicuboctahedron but not a uniform one as the edge pieces are oblong rather than square. There is in existence a similar puzzle actually called Rhombicuboctahedron which is uniform.

Combination puzzle - Wikipedia

aka: Slim Tower)". TwistyPuzzles.com. Archived from the original on 2016-03-03 . Retrieved 2009-06-12. A traditional sliding piece puzzle. There are now endless variations of this original puzzle implemented as computer games. Overall, this is not a bad workaround. The contents of the clipboard are preserved and the delay is much less noticeable if you employ the code provided in Shane's second comment.However, Shane Stanley left a comment on the blog post with a method to retain the original formatting of the clipboard contents. Most of the puzzles in this class of puzzle are generally custom made in small numbers. Most of them start with the internal mechanism of a standard puzzle. Additional cubie pieces are then added, either modified from standard puzzles or made from scratch. The four shown here are only a sample from a very large number of examples. Those with two or three different numbers of even or odd rows also have the ability to change their shape. The Tower Cube was manufactured by Chronos and distributed by Japanese company Gentosha Education; it is the third "Okamoto Cube" (invented by Katsuhiko Okamoto). It does not change form, and the top and bottom colours do not mix with the colours on the sides. A cuboid is a rectilinear polyhedron. That is, all its edges form right angles. Or in other words (in the majority of cases), a box shape. A regular cuboid, in the context of this article, is a cuboid puzzle where all the pieces are the same size in edge length. Pieces are often referred to as "cubies".

Rubiks | Solve it

I've tested this solution provided by Shane, and it does indeed retain all of the original formatting of the clipboard contents if you have rich text on the clipboard. Mechanically identical to the standard 3×3×3 cube. However the pieces are in some way tactile to allow operation by blind persons, or to solve blindfolded. The cube pictured is the original "Blind Man's Cube" made by Politechnika. This is coloured the same as the standard cube, but there is an embossed symbol on each square which corresponds to a colour. Shane later left a second comment, this time with the intent of minimizing the runtime of the script. A variation on the original Rubik's Cube where it can be turned in such a manner as to distort the cubical shape of the puzzle. The Square One consists of three layers. The upper and lower layers contain kite and triangular pieces. The middle layer contains two trapezoid pieces, which together may form an irregular hexagon or a square. Square One is an example of another very large class of puzzle— cuboid puzzles which have cubies that are not themselves all cuboid. Mechanically identical to the 3×3×3 cube. It does, however, have an interesting difference in its solution. The vertical corner columns are different colours to the faces and do not match the colours of the vertical face columns. The corner columns can therefore be placed in any corner. On the face of it, this makes the solution easier, however odd combinations of corner columns cannot be achieved by legal moves. The solver may unwittingly attempt an odd combination solution, but will not be aware of this until the last few pieces.Tower Cube" (in Japanese). Gentosha Education. Archived from the original on 2016-03-04 . Retrieved 2012-05-24. Similar to the Gear Cube but on one axis there are no gears allowing for 3x3x3 turns on the top and bottom layer. Significantly harder than a Gear cube. Identical to the Rubik's Cube in mechanical function, it adds another layer of difficulty in that the numbers must all have the same orientation and there are no colours to follow. The name reflects its superficial resemblance to the two-dimensional Sudoku number puzzle. Siamese cubes are two or more puzzles that are fused so that some pieces are common to both cubes. The picture here shows two 3×3×3 cubes that have been fused. The largest example known to exist is in The Puzzle Museum [8] and consists of three 5×5×5 cubes that are siamese fused 2×2×5 in two places. there is also a "2 3x3x3 fused 2x2x2" version called the fused cube. The first Siamese cube was made by Tony Fisher in 1981. [9] This has been credited as the first example of a "handmade modified rotational puzzle". [9] Although a mechanical realization of the puzzle is usual, it is not actually necessary. It is only necessary that the rules for the operations are defined. The puzzle can be realized entirely in virtual space or as a set of mathematical statements. In fact, there are some puzzles that can only be realized in virtual space. An example is the 4-dimensional 3×3×3×3 tesseract puzzle, simulated by the MagicCube4D software.