Clark Drain CD880 140mm x 115mm x 75mm Stop Tap Stopcock Cover/lid PVC Locking Surround Box

Product Information

Generally if the turning T-bar is in line with the pipe flow, it is open and across is the closed position . If the stop valve has too much PTFE then the chances are that the stop tap body at the thread will split open at the brass wear. If you still need to turn off the mains water supply, the next step is to try the stop tap in your home. This process creates an ice plug that lasts for around 30 minutes, allowing you to extend or repair pipework without draining the whole system. A cure to loosening the dirt and grime within the stopcock can be cured a little by just moving back and forward or opening and shutting.

Important: Pop a monthly reminder in your calendar to check your inside stop valve is working correctly. You will only need this when your house is in need of a DIY plumbing situation or your in a plumbing emergency situation. You can try gently using a spanner to get leverage, but it is easy to snap the spindle, at which point the stop tap will need replacing in its entirety. Indirect systems utilise both a hot water and a cold-water storage vessel, which are usually located in the attic, loft, or an upstairs cupboard.

These companies may track your browsing across multiple devices, and combine your browsing on multiple devices into a single profile that is used to deliver relevant adverts to you on all of those devices.

It’s the same procedure as the external stopcock: turn the tap handle clockwise until the water stops. If you’re having problems turning your stop tap, then it’s a good idea to get a new one fitted in advance of any emergency.Not sure if this is the right place or I should be over in the plumbing section but we are getting our front garden repaved and trying to find out what we can do re the external stop cock. It may also be some distance from the buildings on your property, sometimes below the pavement next to the nearest road.

This is a long piece of metal with a T-bar handle at one end and a special type of fitting at the other.

A stopcock is a kind of tap or valve that is used to restrict the flow of water coming from the mains connections, into your property’s drainage system. This poses a problem, as time marches on the stopcock can seize, leading to the stop tap becoming impossible to use or the unit leaking and causing the problem it is there to help contain. Over time, it is possible that your stop cock may seize up, owing to the fact that it will (hopefully) not frequently be used. The main stopcock valve should be located under the sink other than the mains water stop valve locate outside the boundaries. The main benefit of isolation valves is that they allow you to work on specific areas, without having to shut off the whole system.