Irwin 10507267 Mortar Rake Starter Kit, 8mm

Product Information

By continuing, you consent to the collection, use and sharing of the communications in this chat for the purposes mentioned above and as provided in our Privacy Policy. Our fully trained technical team can support you with advice on setup, parts or repairs for electrical products. All rakes are available with 3 cutters (‘cutters’ as explained in previous answer) with selected widths also available with 4 and 6 cutter configurations. mm overall length tungsten carbide mortar rake in 8 and 10 mm diameters, with three 60 mm long cutting edges. mm diameter, in 26 and 60 mm lengths, the Termite Wall Chaser Rake, for angle grinders with M14 spindles, is suitable for use in aerated concrete - it is NOT suitable for use in traditional brick, block or concrete structures.

We offer the Termite angle grinder attachment which provides dust control / extraction in addition to a depth setting facility. It is possible to use both 26 mm and 60 mm XL rakes with the Termite attachment; on deep cuts, two stage cutting using 26 mm and 60 mm rakes successively, will ensure maximum dust control. The Irwin Mortar Cutter has been designed to use with the mortar rake kit to replace traditional methods of mortar removal such as powered mortar chisels and cutting discs. With exception of items listed below the Termite attachment will fit most Bosch, Hikoki (Hitachi), Makita, Metabo and DeWalt 115 mm or 125 mm angle grinders. I purchased both sizes and on some bricks both were too large to go between the bricks to remove old mortar.

You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. Trading Depot advises strongly against booking Tradesmen until after goods are safely received and checked for this exact reason. When coupled with a suitable dust extractor (vacuum unit) substantially dust free operation will be achieved and the waste debris will also be collected. For both depth and dust control, it is best used with the Termite Grinder Attachment - more details below.

Single motor SV30 M Class Dust Extractor with electric filter shaker, auto-sensing power tool socket and accessories kit. You can calculate your postage charge for Irwin 7 Piece 8mm Mortar Rake Starter Kit before you checkout. The Irwin carbide tipped mortar rake cutters are ideal for the fast and efficient removal of mortar and cement joints in brickwork repointing applications and for chasing out channels for the installation of cable,pipes and switchboxes.We offer 6, 8, 10 and 12 mm diameter rakes, at a standard length of 26 mm, making them the obvious choice for raking out regular brick and stonework mortar joints. The Irwin carbide tipped mortar rake cutters are ideal for the fast and efficient removal of mortar and cement joints in brickwork repointing applications and for chasing out channels for the installation of cable, pipes and switchboxes. For a while now I’ve been using the diamond bits which are ok, but these are much better, the only thing you have to be mindful off is that when taking out soft bricks it does occasionally shoot off into the brick so not as much control as the diamond tips.

We also use cookies to analyse our traffic and share information about your use of our site with our analytics partners.Mortar rakes are perhaps the only solution for raking out irregular joints (such as random stonework) where a diamond raking disk or oscillating plunge blade can not follow the joint profile.

Supplied with five colour-coded spacer rings, matched to popular brands of 115 and 125 mm angle grinders. A deeper joint might be required for inserting strengthening bars or to remove the mortar around a brick that needed removing (albeit a 60 mm rake is slightly short of a typical brick joint depth). uk/irwin-mortar-rakes-8mm-x-20-40mm-4-cutter-irw10507232 54467 IRWIN Mortar Rakes 8mm x 20/40mm 4 Cutter - IRW10507232 https://www. By contrast, it is likely a 6 cutter rake will provide smoother operation on harder mortars, even though it may not cut any faster.

Constructed with 6 tungsten carbide cutting strips, it is generally used for creating channels for cabling, plumbing and similar service inserts.